db2020 unlocking - no more UB? no box? just cables?

www.totalserver.net
SonyEricsson and Panasonic Multi-Server
- 1 -
TotalServer.NET ©2005-2006
This guide and all its contents if the property of TotalServer.NET. Please do not copy or reproduce this
manual without the prior consent of the author.
Total Multi-Server
User Guide Version 2.27 Alpha
Updated 18th September 2006
Compatible with Microsoft™
AMD 64-Bit Processors now supported
This Manual is a first drat and we will continue to update it as much as possible if you notice any mistakes or
errors please E-Mail info@totalserver.net
www.totalserver.net
• Online for over 3 years and still supported
• First Solution to support SEMC De-branding and language change
• First solution to support SEMC unlocking
• First Solution to support RSA unlocking without opening
• First Solution to unlock new generation SonyEricsson phones like T610
• First Server to support unlocking of Sharp 3G models
TotalServer is able to perform the following
• Safe and secure unlocking of supported models
• Does not use expensive equipment, all you need is a cheap cable
• Update firmware to the latest version to fix bugs and problems in earlier firmware
• Change language and T9 dictionaries to your preferred Region
• Repair phone damaged by other solutions
• De-Brand phones to remove all network branding such as start-up logos, icons, menus and locked
media
• Reset user code to default value
• Fast flashing with USB cables in under 6 minutes per phone(1)
• Total Multi-Server supports a wide range of SonyEricsson phones and certain other models
(1) Flashing times depend on the maximum speeds your phone can support check the phone descriptions page
for more info
Is my cable supported?
The Following Cables are supported
• Ericsson T28 service serial cable
• Ericsson T28 service USB cable
• Cruiser 4in1 Cable
• TMS 2in1/4in1 Cable
• Original DSS-xx Syncstation
• DCU-60 for flashing all supported models and unlocking some models
Is my phone supported?
Please check www.totalserver.net for the latest support models and CID’s.
www.totalserver.net
SonyEricsson and Panasonic Multi-Server
- 4 -
TotalServer.NET ©2005-2006
This guide and all its contents if the property of TotalServer.NET. Please do not copy or reproduce this
manual without the prior consent of the author.
Quick Guide to Credit Rates
• Unlocking uses 1 credit
• Flashing the firmware file is a free operation but requires at least one credit on the account*
• Flashing Default Language file uses 1 credit
• Reading/Writing GDFS file uses 1 credit
• ‘Recover phone’ is a free operation but requires at least one credit on the account
• ‘Repair/Reflash phone EROM’ is a free operation but requires at least one credit on the account
• Calculating unlock codes uses 1 credit per calculation
So if you want to unlock and de-brand/upgrade your phone you will require 2 credits, 3 credits for a Smart
Phone such as P910i.
* SonyEricsson Smartphones such P800/P900/P910 require 1 credit to flash the firmware file on the phone.
Sharp phones also require a credit to flash the firmware file.
Ordering credits and cables
You can order credits and cables directly from TotalServer.Net or from one of our many resellers worldwide.
Visit www.totalserver.net for more information.
Starting up the Server Software for the first time
The TMS Client can run on all windows operating systems and requires a free COM or USB port
depending on the cable your have brought.
• Download the latest software version from www.totalserver.net
• Once Downloaded unzip the file and run the Client Software
• Enter the Username and Password
• Press the Info button which will download any software update.
o If there is an update the new client will be downloaded and placed in the same folder as
the client you are using, it will be called client. Close the one you are using and open the
new version called client.
• Once you have the latest version open you are now ready to do the operation you require

Installing Cables Correctly
COM Port Cables
COM Port cables have no drivers, therefore do not need installing and are straight forward plug and play
DSS-xx Sync Station
DSS-xx Sync Station is supported using the standard drivers, but when you are using it with TMS be sure
that original SonyEricsson software, and any other software using the DSS, is not working in the background.
USB Service Cables, TMS Cable or Cruiser Cable
1. Download the drivers from the TotalServer.NET download area and unzip them
2. Insert the Service Cable, it will be automatically detected by Windows
3. The ‘Install New Hardware Wizard’ will be displayed
4. Select the ‘Install Drivers from a specific location’ Option and direct it to the folder where the
drivers have been unzipped
5. Windows will prompt you that the drivers are not signed, ignore this and click ‘Continue Anyway’
6. The cables is now installed and ready for use
Total Multi-Server will only display the COM ports installed on your PC, so you can either try each one or go
to device manager and check which one is in use by the service cable.
Installing DCU-60 Service Cable
1. Download the special EPI drivers which are available in the TotalServer.NET download area
2. Have all original DCU-60 drivers installed
3. Switch off phone
4. Hold the ‘c’ button on the phone
5. Insert cable
6. A new device will now be found and you will need to point the manager to our special drivers
7. Once it is installed you can now use TMS
Important things to remember
• SonyEricsson does not allow the update of branded phones firmware with the SonyEricsson
Update Service. Even after De-Branding with the TMS service you will not be able to use this
service.
• Only the customer is responsible for the use of the server and takes all responsibility for there
actions
• If you receive any errors Please forward a screenshot, to take a screenshot press the prt scr
button on your keyboard, then open paint and paste save your image in jpg format and the size will
be around 200-300 kb maximum, and the ATS file saved in the same directory as the client
software.

• RTS and DTR – if your cable doe not work try ticking these two options on and off
• COM – Select the correct COM port your cable is attached to
• Cable Speed – This is the Speed at which the program communicates with the phone attached
• Calculate Codes – Calculate the unlock code for the phone
• Check RSA – This button checks to see if you have a new generation RSA protected phone and is
FREE
• Check CID – This button checks the Colour and CID of the phone attached and is FREE
• Phone Colour – This refers to the type of board in the phone. Most phones are Red however there a
few Brown phones - this setting is vital for flashing
• CID Type – This is the hardware type identifier there are many differ CIDs all listed earlier in this
manual
• Unlock Phone + Reset User/Lock Code – This is the required setting when you wish to unlock your
phone and will also reset the user/lock code to 0000
• Read Phone User/Lock Code – This will read the phone lock code, sometimes known as security code.
This does not affect your SIM code
• Read Codes/Unlock Code – Read the unlock codes from the phone
• Clear Total Call Time Counter – This will reset the Total Call Time Counter on the phone
• Disable/Remove Camera Shooter Sound – This will Disable the Camera shutter sound on the phone –
only available when flashing
‘Read Phone User/Lock Code’ and ‘Clear Total Call Time Counter’ can not be selected at the same time
How to download the required flash files
• Open the client software and enter the supplied username/password
• Press the ‘Download Area’ button
• The folders can be browsed just like an FTP
• Select the file you require and press download file, you can only select one at a time
• This file will begin to download, if you need more go back and download again
• Once you are done press Exit
Which COM speed to use
• If you have a serial COM port cable use Baud Rate 115200
• If you have a USB cable use Baud 921600

This guide and all its contents if the property of TotalServer.NET. Please do not copy or reproduce this
manual without the prior consent of the author.
How to unlock your phone
*****Always fully charge your phone*****
1. If it is a new phone make sure it is switched on and you have allowed it to fully boot before switching
it off and doing any operation
2. Switch OFF your phone
3. Open the Client Software and enter your username and password
4. Insert your cable into the COM/USB port and phone
5. Check your settings
6. Select your phone
a. If its an old phone press Unlock and follow the onscreen instructions
b. If it’s a new SEMC phone select the Unlock tab and tick ‘Unlock Phone + Reset User/Lock
Code’ and if you want you can select ‘Clear Total Call Time Counter’ then press Do Jobs
7. Once its done switch on the phone and check it boots fully before turning it off or doing any other
operations
On RSA protected phones the procedure for unlocking is exactly the same there is no reason to press any
other button than Unlock.
On some phones the unlock button is replaced by a Read Codes button. With Read Codes the unlock codes will
be read from the phone.
The software will display 4 codes and you will need to enter at least one of these codes into the phone. To
enter the phones press <**< (Joystick Left, Star, star then Joystick left quickly) you will be taken to the
SIM lock menu. The closed lock will be shown with a picture of a closed padlock. Enter the option with the
closed padlock and enter the correct code.
Restore and remove RSA are for advanced users only
Please only use the Remove RSA and Restore buttons if you an experienced user and know what these button
do. If you use these function and do not know what you are doing you could KILL your phone

This guide and all its contents if the property of TotalServer.NET. Please do not copy or reproduce this
manual without the prior consent of the author.
How to De-Brand your SEMC Phone
All SEMC phones follow the same guidelines with only different firmware and default language files.
These are also the instructions used for updating the firmware and language in your phone
When updating your firmware you must flash the firmware and default language files.
This will erase all the settings from your phone so please ensure you back up anything you wish to keep
*****Always fully charge your phone*****
1. If it is a new phone make sure it is switched on and you have allowed it to fully boot before switching
it off and doing any operation
2. Switch OFF your phone
3. Open the Client Software and enter your username and password
4. Insert your cable into the COM/USB port and phone
5. Check your settings
6. Press Check CID to check the Colour and CID of your phone
7. Download the correct flash files
Please Note: the versions of the Firmware and Default Language file must match for example If you choose
a R2AE033 firmware file you must also chose a R2AE033 Default Language file. Also the Region of both must
match eg for EU1 Language file you must chose the EU Firmware file
SonyEricsson SmartPhones require you to flash both the Firmware and PDA parts and requires 2 credits.

In this example we are de-branding a W800 phone with a USB TMS service cable. Please Note this is also
how to convert a K750 to a W800
Select the K5S File you require, in this example we have used W800_R1BC002_ZONE_1_EU-EMEAUS.
75S this the correct file for EU, EMEA and USA language packs
As you can see we have only selected the firmware file, this will not use a credit because flashing the
firmware file is free, as long as you have at least 1 credit in your account. We ask all our customers to flash
the firmware file separately to the default language file because we have this conserves battery power and
results in fewer errors.
Once you have the correct file selected then press the ‘Program files to Phone Memory’ button follow the on
screen instructions and once it has completely finished and displayed done. Take out the battery and reinsert
it into the phone but do not power on or take out the cable. Always ensure the back cover is on to fully
secure the battery.
Ensure the cable still has a firm connection with the phone

THIS INFORMATION IS RESOURCE DOCUMENT I FOUND IN SURFING. ANY COMMENT OR SUGGESTION JUST POST IN THE THREAD. THIS MIGHT BE USEFUL TO THOSE WHO WANT MORE IN SAVING MONEY. -FIXMOBILE